Akai DPS12 Manuel de l'opérateur télécharger pdf (Page 138)

126

Chapter 13: Using the effects

5. Press the [F5] key in Mixer mode and select a type of Insert effect. Also, set the other effect

parameters, if necessary.

6. Press the [F1] key in Assign mode, and select .

The effect return signals from EFFECT A and B are switched to analog input signals 3/4 and 5/6.

Example: Set the effect return signals to . In this case, the effect return signals

from EFFECT A are routed as analog inputs 3 and 4.

7. Press the [F2] key in Assign mode, and set the corresponding analog inputs to .

Example: Set the effect return signals from EFFECT A to .

8. Press the [F3] key in Assign mode, and assign these analog inputs to tracks.

Example: Assign the effect return signals from EFFECT A to Tracks 5 and 6.

When you turn on the [RECORD SELECT] keys of the recording tracks and start recording,

the sound will be recorded to the tracks with the effect applied.

➸

NOTE :

Make sure that the level of AUX SEND A (when EFFECT A is used) or AUX SEND B (EFFECT

B is used) is set to on the TRACK MIX channels of the corresponding recording tracks. If the level is set

to any value other than , the signals will loop.

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 155 156

Pas de commentaire

Akai DPS12 Manuel de l'opérateur Page 138