Akai S5000 Manuel de l'opérateur télécharger pdf (Page 188)

178 Version 1.21

RECORD /

RECORD

Pressing RECORD will show something like this screen:

The parameters are:

RECORD LEVEL This sets the record level. This is a software control which is used instead

of a front panel control. You will note the icon in the parameter. Pressing

the RECORD LEVEL key again allows you to set the gain sensitivity of

the input and the choices are MIC, LINE and PRO. Use MIC to record

low level signals from microphones; use LINE to record line level signals

from keyboards or typical mixing consoles, etc.; use PRO when recording

from high level equipment running at +4dB.

RECORD TRIGGER Here you may select what will initiate recording. The choices are:

THRESHOLD L/R Recording will start once the threshold level

on either the left or right channel is exceeded.

THRESHOLD L Recording will start when the input to the left

channel exceeds the threshold.

THRESHOLD R Recording will start when the input to the right

channel exceeds the threshold.

AUTO L/R Recording will start once the threshold level

on either the left or right channel is exceeded.

It will automatically stop recording if the signal

falls below the threshold.

AUTO L Recording will start when the input to the left

channel exceeds the threshold. It will

automatically stop recording if the signal falls

below the threshold.

AUTO R Recording will start when the input to the right

channel exceeds the threshold. It will

automatically stop recording if the signal falls

below the threshold.

MIDI NOTE-ON Recording will start when a MIDI note-on is

received on the channel specified in the MIDI

TRIG CHAN (See below).

1 2 ... 183 184 185 186 187 188 189 190 191 192 193 ... 291 292

Pas de commentaire

Akai S5000 Manuel de l'opérateur Page 188