Akai S5000 Manuel d'utilisateur télécharger pdf (Page 2)

which means the flash card can only be inserted and removed when the

drive is powered OFF. In other words, if the drive is powered ON, then

the card

cannot be removed or risk loss of data or corruption.

Most producers who purchase this drive use a compact flash card with

the maximum capacity of 64GB so they never have to remove it for a

long time. 32GB, 16GB, 8GB, 4GB, 2GB, 1GB compact flash cards are

also acceptable cards. Also, we use many different brands but have a

preference for the Kingston brand as it is ultra-reliable and we have

never had any problems. We use the following brands in our facility:

A little information about Compact Flash Cards

This procedure assumes the floppy drive will still be in place and the

compact flash reader/writer drive will be placed in the second bay

located next to the floppy drive.

Manually setting the SCSI ID

We ship the compact flash drive kit preset to scsi id 0 (as shown in the

first picture below), but should you wish to set the drive to a different

scsi id, simply refer to the other pictures below. The pictures show scsi

id 0, 1, 2, 3, and 4. Also, if look at the bottom row (9

row), there is no

jumper set which means active termination is set to enabled (ON).

Should you wish to disable termination, then simply set the jumper to

1 2 3 4 5 6 7 ... 11 12

Pas de commentaire

Akai S5000 Manuel d'utilisateur Page 2