Akai MPC5000 Spécifications télécharger pdf (Page 134)

Sample, Keygroup and Synth Programs 120

03. Select the first sample field, labeled as '1' and select the sample to assign to the pad.

In the example shown, the sample DJ_RUBS is displayed in the first sample field.

You can select any sample currently stored in the MPC5000’s RAM by turning the [DATA] wheel. You can assign samples by selecting '2' through

'4' fields. If you assign samples to '2' through '4' fields, you can play several samples at once.

For more information on loading and saving samples, see "Saving a Sample" on page 166.

 Note On vs. One Shot

When you play a sample by hitting the pad, the sample will be played to the end. This is useful when you want to play

short drum sounds. However, when you play a long sample such as a phrase sample, it is better to set the MPC5000 to

play the sample only while you hold the pad. In this section, you will learn how to play the sample only as long as the

pad is pressed.

01. In the Sample page of PROGRAM mode, hit the pad you wish to

change.

The pad number display in the left of the screen will change according to the pad

that you hit.

02. Select the '1' field, and press the [WINDOW] button.

The PLAY MODE window will be displayed.

03. In the '1' field select one of the following:

ONE SHOT

The MPC5000 plays the sample until the end regardless of how long

you hold the pad.

NOTE ON

The MPC5000 plays the sample only while you hold the pad.

04. Select fields '2' - '4' to adjust each sample assigned to the pad individually.

Note: When you loop the sample, set the play mode to NOTE ON. When you select ONE SHOT, a sample will NOT loop,

even when the sample's loop is set to ON.

 Volume and Tuning For a Sample

You can set volume and tuning for samples that are assigned to a pad.

01. In the Sample page of PROGRAM mode, hit the pad you wish to edit.

The pad number display in the left of the screen will change according to the pad

you hit.

02. Select the 'Lvl' field.

03. Adjust the volume to the desired level.

You can audition the level changes by hitting the pad as you set the level.

04. Select the 'Tune' field.

The 'Tune' field has two fields divided by a decimal point.

The 2 digits on the left set tuning by semitones.

The 2 digits on the right change the tuning by cents (100 cents = 1 semitone).

05. Set the tune to the desired pitch offset.

You can audition the tune changes by hitting the pad as you adjust the pitch.

 Velocity

You can control the sample volume by velocity (how hard you hit the pad). With this feature, you can play the pads like

real drums; when you hit the pad strongly, the sound will be loud and vice versa.

01. In the Sample page of PROGRAM mode, hit the pad you wish to edit.

The pad number display in the left of the screen will change according to the pad

you hit.

02. Press the F5 softbutton (AmpEnv).

The Amp Envelope window will be displayed. This window is also available by

selecting the LVL Field and pressing the [WINDOW] Button.

03. Select the 'V>Level' field.

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 221 222

Commentaires sur ces manuels

Pas de commentaire

Akai MPC5000 Spécifications Page 134

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de musique Akai MPC5000