Akai MPC5000 Spécifications télécharger pdf (Page 88)

HD RECORD Mode 74

AUDIO ONLY

Only audio will be cut / copied.

AUTOMATION ONLY

Only Automation will be cut / copied.

Mixing Hard Disk Tracks

Output level, pan and effects settings can all be set for each Hard Disk track. To access the Hard Disk track mixer, do

the following.

01. Press [MODE]+[PAD 16] (HD RECORD) to access the HD

RECORD mode.

02. Press [F3] (HD MIX) to access the HARD DISK TRACK MIX page

as shown on the right.

The Columns shown represent each of the eight Hard Disk tracks. Each Track

Number will be displayed next to the LEVEL indicator in the LVL row.

 Setting Track Output

To set which out each Hard Disk track will be routed to, do the following.

01. In HD RECORD mode, press [F3] (HD MIX).

The HDMIX page will be displayed.

Each column indicates Hard Disk tracks 1-8 and the currently selected track is highlighted. The row at the top is the 'OUT' field, where you where

you will assign a track to a specific assignable output.

02. Hit the pad that corresponds with the desired track.

The column for the selected track will now be highlighted.

You may also select each track by using the [CURSOR] buttons.

03. Select the desired output in the OUT row.

You can use the [CURSOR] buttons to move to each field in MIXER mode, and you can adjust each level with the [DATA] wheel. The following

choices are available:

The track will be sent to the [STEREO OUT]. The track can be panned.

1/2 to 7/8

The track will be output to the corresponding [ASSIGNABLE MIX OUT]. The track can be panned.

1 to 8

The track will be output in MONO to the corresponding [ASSIGNABLE MIX OUT] output. Panning is disabled.

Tip: You can also easily change the settings for tracks by using the Q-LINK controls. For more information on using the

Q-LINK with MIXER Mode, see 'Using Q-LINK Controls with MIXER Mode' on page 91.

Track Matrix

The Track Matrix shows which track the left and right inputs are armed as set in the RECORD

page, allowing for quick reference.

 Setting the level and pan of a Track

01. Press [MODE]+[PAD 16] (HD RECORD) to access the HD RECORD mode.

02. Press [F3] (TRKMIX) to access the HARD DISK TRACK MIX page.

03. Hit the pad corresponding to the desired track.

The column of the selected track will be highlighted. You can select several tracks by hitting pads while holding down the [SHIFT] button.

Tip: When you select several tracks and change a parameter (Level or Pan), the parameter on each pad will be changed

relative to the current setting.

04. Adjust the PAN value in the PAN row.

The fourth row down is labeled 'PAN'. Here is where the pan setting of each track is set. The knob graphic indicates the pan setting. The location

of the line within the circle indicates the current pan setting.

05. Adjust the Level value in the LVL row.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 221 222

Commentaires sur ces manuels

Pas de commentaire

Akai MPC5000 Spécifications Page 88

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de musique Akai MPC5000