Akai MPC Manuel de l'opérateur télécharger pdf (Page 110)

103

MPC500 Operator's Manual rev 1.0

Chapter 15 Connecting the MPC500 to

your computer

The MPC500 supports the USB mass storage class. When you connect the MPC500 to a PC that supports USB mass storage class, the PC

will recognize the memory card in the MPC500 as a removable media drive. You can transfer the data between the recognized memory card

and the PC. You can save the data on the memory card to the PC, or you can load the data from the PC to the memory card.

You need Windows 2000/Me/XP or later, or Mac OS 9.x/10.x or later version.

Note: The computer cannot recognize the MPC500's internal memory directly. To save the data in the internal memory to the computer,

you need to save the data to the memory card first. Also, the data from the computer will be saved to the memory card. To use the data in

the MPC500, load the data from the memory card.

 Windows 2000/Me/Xp

1. In the 'Type' field of either the Save or Load page, choose USB.

This brings up the USB page, which you use to connect the MPC500 to the PC.

2. Connect the MPC500’s USB slave jack to the PC’s USB host jack via USB cable. The screen on the MPC500 will

change as follows:

3. When you connect the MPC500 to the PC for the first time, the message, "Found New Hardware" will be displayed.

Follow the instruction on the display.

Once the PC recognizes the MPC500, its "Removal" icon will be displayed in the task bar. In the Device Manager, the MPC500 will be

displayed as a USB Mass Storage Device.

In My computer, the MPC500 is displayed as a removable disk.

4. To save the data to a PC, select the data and drag and drop it from the removable disk to the hard disk. To load the

data, select the data and drag and drop it from the hard disk to the removal media.

5. When you finish the data transfer, click the "Removal" icon on the PC’s task bar and select the "Stop USB Mass

Storage Device - Drive (:)".

Note: In the "(:)", a drive letter is displayed, which indicates the drive in the PC.

When you select to stop the device, the "'USB Mass Storage Device is ready to remove safely" dialog box will be displayed.

6. Remove the USB cable from the USB jacks of the MPC500 and the PC.

Note: Make sure that you do Step #5 "Remove the device" before disconnecting the USB cable.

Note: You can transfer the data between the MPC500 and the PC only when the USB page is displayed. You can not move to another page

or mode from USB page unless you disconnect the USB cable.

 Macintosh

Insert the memory card to the MPC500’s card slot.

1. In the 'Type' field of either the Save or Load page, choose USB.

This brings up the USB page, which you use to connect the MPC500 to the PC.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 119 120

Pas de commentaire

Akai MPC Manuel de l'opérateur Page 110