Akai RE32 Manuel de l'opérateur télécharger pdf (Page 168)

158 Version 1.00

SYSTEM SETUP

SYNC SETTINGS

Pressing SYNC (F2) on the SINGLE MACHINE SETUP page will take you to the following page:

The parameters on the page are:

EXT. TIME SOURCE Here, you may choose the type of external timecode synchronisation

you are using and works in conjunction with the ON-LINE key on the

RE32. When the ON-LINE key is not switched on, the system is ‘free

running’. With the ON-LINE key switched on, the system will not playback

or record unless the timecode type selected here is received. The

selections in this field are:

SMPTE 24 fps - This selects that the selected machine will synchronise

to timecode running at 24 frames per second. This would be a typical

selection to make when synchronising to film equipment.

EBU 25 fps - This selects that the selected machine will synchronise to

timecode running at 25 frames per second. This would normally be

selected when sync’ing to EBU timecode in Europe.

SMPTE 29.97 nd - This selects that the selected machine will synchronise

to non-drop timecode running at 29.97 frames per second. This would

typically be used in America and Japan when working with NTSC colour.

SMPTE 29.97 drop - This will synchronise the selected machine to 29.97

drop timecode - NTSC colour. This would normally be used in America

or Japan.

SMPTE 30 nd - This selects that the selected machine will synchronise

to non-drop timecode running at 30 frames per second. This is the

standard for NTSC black and white television and would typically be

used in America, Canada and Japan. Many American and Japanese

music studios use this frame rate.

SMPTE 30d NTSC BW - This will synchronise the selected machine to

30 drop frame timecode. This is the standard for NTSC black and white

television and would occasionally be used in America, Canada or Japan.

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 191 192

Pas de commentaire

Akai RE32 Manuel de l'opérateur Page 168